When the air goes down, the line goes down. Innovative Oil Solutions answers emergency compressor calls around the clock, including nights, weekends and holidays. Our factory-trained technicians find the real cause, fix it, and get your plant air back as fast as the job allows, then help you keep it from happening again.
Plugged separators, blocked coolers, failed thermostatic valves, low oil and bad fan motors are among the most common causes of a unit that trips on heat.
Motors, starters, contactors, controllers and wiring. We check whether the problem is electrical or mechanical before anything gets condemned.
We confirm the failure, split the air-end from the motor and send it to our rebuild shop.
Failed inlet valves, sticking controls, leaks and undersized piping can all starve your process.
Refrigerated and desiccant dryers, filters and condensate drains, so water and oil stay out of your lines.
Emergency service for industrial vacuum pumps, blowers, nitrogen generators and AOD pumps, not just compressors.
A few details help us show up with the right parts and get you running sooner:
See more on our Recent Work page.
We are headquartered in New Braunfels and serve industrial facilities across Texas, including San Antonio, Austin, Houston, Corpus Christi and Dallas–Fort Worth, plus the towns and plant sites in between. We work on rotary screw, reciprocating, scroll, oil-free and centrifugal compressors from all major brands, including Atlas Copco, Bobcat, Boge, Cameron, Chicago Pneumatic, Doosan, ELGi, FS-Curtis, FS Elliott, Gardner Denver, Hanwha, Ingersoll Rand, Kaeser, Kaishan, Quincy, Sullair and Sullivan-Palatek.
Most of the emergency calls we answer trace back to maintenance that slipped: a separator past its life, a dirty cooler, oil that broke down in the heat. Most industrial compressors should be inspected quarterly and fully serviced every 2,000 to 4,000 operating hours, and hot or dusty compressor rooms usually need shorter intervals. We track every unit in our in-house tracking system and use oil analysis to catch wear early.
See our preventative maintenance approach, or book a compressed air audit to find the leaks and pressure problems that make compressors work harder than they should.
Yes. Call 1-830-214-6544 any time, including nights, weekends and holidays. Emergency service is available around the clock even though our office keeps regular business hours.
All major brands, including Atlas Copco, Bobcat, Boge, Cameron, Chicago Pneumatic, Doosan, ELGi, FS-Curtis, FS Elliott, Gardner Denver, Hanwha, Ingersoll Rand, Kaeser, Kaishan, Quincy, Sullair and Sullivan-Palatek. We work on rotary screw, reciprocating, scroll, oil-free and centrifugal compressors, plus dryers, vacuum pumps, blowers and nitrogen generators.
We confirm the failure on site, split the air-end from the motor and send it to our rebuild shop. Ask us about rental options to keep your plant running while the rebuild is done.
Often, yes. Depending on the failure we can make a temporary repair or set up a rental unit so production keeps moving until the permanent fix is in.
A preventative maintenance program built around your run hours and conditions, oil analysis and a periodic air audit catch most problems before they shut you down.
We are based in New Braunfels and serve industrial sites across Texas, including San Antonio, Austin, Houston, Corpus Christi, Dallas–Fort Worth and the surrounding areas.
Call 1-830-214-6544 for 24/7 emergency service, or send us the details and we will get back to you.
